LAARS FT/Bradford White Brute Series (ALL) Burner Mounting Screws

LAARS FT/Bradford White Brute Series (ALL MODELS EXCEPT 301/399) Burner (Upper Case) Mounting Screws.

The four UPPER BURNER CASE Mounting Screws are "M5x10mm Hex Washer Head Fine Thread METRIC Screws."

The SAE Equivalent that can be used is "10-32x1/2 Hex Washer Head Machine Screws 18-8 Stainless Steel Screws."

In early versions of FT 140 & FT 199 these screws were phillips head ONLY and were upgraded to HEX HEAD for reliability and ease of use.

Related Articles
LAARS/Bradford White FT Models Circuit Boards with FT# and R# (current and updated 11/2025).
LAARS/BRADFORD WHITE FT Circuit Board Part #'s with FT #'s and R#'s. ALL Models and Sizes. Circuit Board Hardware # NGTX= Combi NGTB= Heat only MFTCW140NA1XN Generation 1-Serial # F15000000-F18000308 COMBI WALL 140 CURRENT # MODEL # OLD # PREVIOUS # ...
Cascading the Laars FT Series Floor and Wall HEATING ONLY Boilers
Cascading the Laars FT Series Floor and Wall HEATING ONLY boilers. https://www.laars.com/images/uploads/products/1349C.pdf
LAARS LT/Bradford White Infiniti GS Series- Error 42 -Wall Hung Water Heaters -Vent Piping Installation- Intake and Exhaust.
LAARS LT/Bradford White Infinity GS Series Wall Hung Water Heaters. Error 42:Exhaust (Hard Lockout). APS (Air Pressure Switch) - Closed is Normal, Open is Fault. 1. Press the Power button on the display controller to clear the Error Code. 2. Check ...
LAARS FT 301/399 Cascading Instructions
LAARS FT 301/399 Cascading Instructions Cascade cables Cascade programming Click on attachment to view
LAARS LT Recirculation Model LT199NRX1/LT199PRX1-Recirc programming functions and defaults.
The LAARS LT199NRX1/LT199PRX1 (recirc models) are program defaulted from the factory for NON recirc. To activate recirc function the water heater must be programmed to provide recirc function depending on the recirc option selected and piped in that ...

Related Articles