LAARS FT Series WALL and FLOOR All models and sizes default temperatures
It has been noticed and we have been alerted that the parameters for CH HIGH and CH LOW , MAY now be factory defaulted as 130F high and 86F low.
In any case be sure to go thru the parameters and check BOTH HIGH and LOW limit on CH AND DHW on all start ups, power outages, replacement of circuit boards etc.
We should be doing this regardless of the installation wiring (internal modulation, eternal modulation, outdoor reset or i.e.Tekmar 0-10v). Adjusting the CH HIGH and CH LOW has not been changed or altered , so please go thru the parameters as always should to make these simple adjustments as needed based on installation.