Laars MFTCW and MFTHW Circuit Board Part #'s with Revisions and Serial #'s
Circuit
Board Part #'s and Revisions
June 3, 2020
KR
FLOOR
New # Model Old #
R2080600 MFTCF140 FT1616
(REV 1.01) SFN#
R2080603 MFTCF199 FT1898
(REV 1.01) SFN#
COMBI
WALL 140
New# Model Old#
R2080601 MFTCW140 FT1900 (Serial # F15xxx000-F18xxx308)
(REV.22) SFN#
R2080605 MFTCW140 FT1899 (Serial # F18xxx309-Present)
(REV.24) SFN#
COMBI
WALL 199
New # Model Old#
R2080604 MFTCW199 FT1899
(All Serial #'s)
(REV.24) SFN#
HEAT ONLY All SIZES
New# Model Old#
R2080602 MFTHW-All FT1052
(REV.10) SFN#
(Dip Switch Selection for BTU Size (80-199)
Related Articles
LAARS/Bradford White FT Models Circuit Boards with FT# and R# (current 11/2024)
LAARS/BRADFORD WHITE FT Circuit Board Part #'s with FT #'s and R#'s. ALL Models and Sizes. MFTCW140NA1XN Generation 1-Serial # F15000000-F18000308 COMBI WALL 140 CURRENT # MODEL # OLD # PREVIOUS # R2080601 MFTCW140 FT1900 FT1900 *SET DIP SWITCHES FOR ...
Laars FT Circuit Board Revisions
Circuit Board Part #'s and Revisions June 3, 2020 KR FLOOR New # Model Old # R2080600 MFTCF140 FT1616 (REV .04) SFN# R2080603 MFTCF199 FT1898 (REV 1.01) SFN# COMBI WALL 140 New# Model Old# R2080601 MFTCW140 FT1900 (Serial # F1500000-F1800308) ...
Manifold Repair Kits for Laars MFTCW and MFTHW-All Models and Sizes
Manifold Repair Kits for Laars MFTCW and MFTHW -All Models and Sizes Manifold # Description Gasket Kit # Gasket Kit Contains P2134400 Combi kit w/unions R2085400 2 Gaskets (for MFTCW 140/199) P2134400 Combi kit w/dielectric R2085300 2 Gaskets/2 ...
Laars FT Blower Fan Models , Combi MFTCW and Heat Only MFTHW
Blower(Fan) models Thursday June 11, 2020 7:00 AM MFTCW140= FT1407 (Serial #'s F1800309-Present) (Two Vacuum Tube APS -closed barb) (Revision 24) *New Style* MFTCW140= FT1405 (Serial #'s F1500000-F1800308) (Single Vacuum Tube APS-open barb) (Revision ...
LAARS MFTCW Circuit Boards
The MFTCW-199 Circuit board R2080605 is now discontinued and replaced with the R2080604. R2080604 is for Both MFTCW-140 and MFTCW-199 and must be set by the Dip Switches in the field. (Switches 1,2,3) Dip Switch Settings