TPI Bluetooth Combustion Analyzer Model DC710 in "Lockup"
If you find your TPI Model DC710 Bluetooth Analyzer "Locked Up" , not responding and not able to reset or power down .... Plug the Analyzer into AC power , depress and hold the power button and the analyzer will power down .
If you feel that the analyzer might have been a "HIGH CO" (carbon monoxide) location then move the analyzer into a "fresh air " location (outdoors, away from the mechanical or boiler room you are working in) and power the analyzer back on.
Allow the analyzer to stay in a fresh air location with the analyzer pump ON for a minimum of 5 minutes.
Related Articles
PRE PURGE TPI DC 710 Bluetooth Analyzer
Free Air Pre Purge of TPI DC 710 Bluetooth Analyzer It is VERY important to allow the TPI DC 710 Bluetooth Analyzer to PRE PURGE in FREE AIR prior to performing a combustion analysis. The TPI DC 710 must go through a full start up procedure which ...
TPI DC711 Combustion Analyzer with built in LCD screen
The TPI DC711 Combustion Analyzer product info is attached. And the TPI Smart Probes product info is also attached. The DC711 Combustion Analyzer has a built in LCD screen (the DC710 DOES NOT have a screen and MUST be utilized with a smart phone or ...
TPI "Smart Probes"- Bluetooth Tools for Diagnostics and Testing HVAC Equipment.
TPI "Smart Probes.". Bluetooth Tools for Diagnostics and Testing of HVAC Equipment. TPI has a complete selection of Bluetooth test tools and equipment that can be utilized with TPI Bluetooth Combustion Analyzers or stand alone. Please see attached.
TPI DC710 "KITS"
TPI DC710 KITS DC710C1= Analyzer, Flue Probe, Chargers, Carry Case. DC710C2=DC710C1 AND SP620(Bluetooth Manometer). DC710C3=DC710C1 AND A740BT(Bluetooth Printer). DC710C4=DC710C1 AND A740BT(Bluetooth Printer) AND A773(Sulfur Filter used for fuel ...
TPI Combustion Analysis