Related Articles
LAARS Technical Bulletin 24-23: Installing Mini-Therm® JX Boiler Without a Low Loss Header
Applicable Products: Mini-Therm JX Product Line, sizes 50-100 Problem Statement: Mini-Therm JX Models 125, 150, and 200 are built standard with a low loss header, but models 50, 75, and 100 are available with or without the low loss header. If you ...
Support Clamps for Aquatechnik Piping: Riser Clamps and Bifix Clamps
Proper pipe support is critical in Aquatechnik PPR systems to ensure longevity, alignment, and safety. This article explains the use of riser clamps and bifix clamps, including when and where they should be used for vertical and horizontal pipe runs. ...
Primary/Secondary Piping, Piping GUIDELINES and Use of Sensor with Indirect Water Heater Installations.
Recent additions to Laars FT I/O Manuals: Primary /Secondary Piping Guidelines. Use of Sensor with Indirect Water Heater Installations. IO manual pages 45 and 46 attached. Click on attachments.
LAARS FTHF 199 CASCADE Piping and Wiring
Attached is the new cascade piping and wiring diagrams manual (publication 1349C) for LAARS FTHF 199 Floor Boiler. Pay particular attention to page 4 of this manual as this shows the position of the internal valves when PIPED cascaded ! I have ...
Laars FT Wall Combi Domestic Hot Water Recirculation Piping Diagram
Laars FT Wall Combi Domestic Hot Water Recirculation Piping Diagram